Abstract
A method is developed to accurately determine the spatial impulse response at the specifically discretized observation points in the radiated field of 1-D linear ultrasonic phased array transducers with great efficiency. In contrast, the previously adopted solutions only optimize the calculation procedure for a single rectangular transducer and required approximation considerations or nonlinear calculation. In this research, an algorithm that follows an alternative approach to expedite the calculation of the spatial impulse response of a rectangular linear array is presented. The key assumption for this algorithm is that the transducer apertures are identical and linearly distributed on an infinite rigid plane baffled with the same pitch. Two points in the observation field, which have the same position relative to two transducer apertures, share the same spatial impulse response that contributed from corresponding transducer, respectively. The observation field is discretized specifically to meet the relationship of equality. The analytical expressions of the proposed algorithm, based on the specific selection of the observation points, are derived to remove redundant calculations. In order to measure the proposed methodology, the simulation results obtained from the proposed method and the classical summation method are compared. The outcomes demonstrate that the proposed strategy can speed up the calculation procedure since it accelerates the speed-up ratio which relies upon the number of discrete points and the number of the array transducers. This development will be valuable in the development of advanced and faster linear ultrasonic phased array systems.
Highlights
Ultrasonic phased array transducers are attracting attention across the board with respect to applications in both non-destructive evaluation (NDE) and clinical diagnostics
(3), the spatial impulse response function canthe be intersected between the projection circle and the transducer aperture
If more than one arc exists, simplified as the integral of angle at time instant t multiplying with a constant term: spatial impulse response can be expressed as the summation of the central angles of all the intersected arcs inside the transducer aperture: R t R Θ (τ ) δ(τ −t) h( x, y, z; t) = t 2 Θ 2(τ ) 2π cdΘdτ
Summary
Ultrasonic phased array transducers are attracting attention across the board with respect to applications in both non-destructive evaluation (NDE) and clinical diagnostics. San Emeterio et al [18] proposed a close-form description about the derivation of analytical expressions for the time-domain spatial impulse response of a rectangular piston by considering the projection position of the field point under several conditions. A novel and accurate computing method is proposed to further speed up the computational efficiency for the near and far fields radiated from linear ultrasonic phased array transducers. The proposed approach is based on the classical time-domain spatial impulse response approach, without any paraxial, far-field approximations, or nonlinear calculation. The derivation method for a uniformly vibrating rectangular transducer is used and further improved with a more extensive description about the relationship between the aperture shape and the discontinuity possibilities in the temporal slope of the spatial impulse response function [18]. To compare the time required for the proposed method and the classical summation method
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.