A fast gas chromatography coupled with electron capture negative ion mass spectrometry in selected ion monitoring mode screening method for short-chain and medium-chain chlorinated paraffins.

Abstract

Chlorinated paraffins (CPs) are a group of anthropogenic pollutants that consist of complex mixtures of polychlorinated n-alkanes of different chain lengths (~C10 to C30 ). Persistence, bioaccumulation, toxicity, and long-range transport of short-chain chlorinated paraffins (SCCPs, C10 - to C13 -CPs) have prompted their classification as persistent organic pollutants (POPs) by the Stockholm Convention in 2017. Due to the varying chain lengths and chlorination degrees, quantification of SCCPs and medium-chain chlorinated paraffins (MCCPs, C14 - to C17 ) using gas chromatography coupled with electron capture negative ion mass spectrometry in selected ion monitoring mode (GC/ECNI-MS-SIM) is not only challenging but also very time consuming. In particular, up to eight GC runs per sample are required for the comprehensive GC/ECNI-MS-SIM quantification of SCCPs and MCCPs. These efforts are high especially if the samples do not contain CPs above the limit of detection (LOD), subsequently. We developed a semi-quantitative and sensitive method for the examination of SCCPs and MCCPs in one GC run. This GC/ECNI-MS-SIM screening method was based on the recording of Cl- (m/z 35 and 37), Cl2 - (m/z 70 and 72), and HCl2 - (m/z 71 and 73) isotope ions and evaluation of the ratios between them. Correctness of the results of the screening method was verified by analysis of edible oils with and without CPs, CP standards, as well as a technical CP mixture. Polychlorinated biphenyls (PCBs) and other polyhalogenated aromatic compounds, as well as brominated flame retardants, do not form all of the fragment ions analyzed by the screening method. After the screening, only CP-positive samples may need to be measured in detail. Measurement time will already be gained in the case of ~10% samples without CPs.