Abstract
The Series-Resonant dc-dc converter (SRC) is widely applied in a large range of voltage and power. In most applications, fault tolerance is a highly desired feature and it is obtained through redundancy. This paper proposes a fault tolerance solution for the SRC, which could drastically reduce the need of redundancy. Using the proposed scheme, the full-bridge based SRC or multilevel based SRC can be reconfigured in a half-bridge topology, in order to keep the converter operational even with the failure (open circuit or short circuit) of one switch. Since the proposed scheme can be applied to the FB-SRC and multilevel SRC, a family of fault-tolerant converters is proposed in this work. The advantage of the proposed approach are: minimum additional hardware and no deterioration of the converter efficiency. The proposed fault tolerant solution was experimentally tested in a 10 kW SRC prototype with input/output voltage of 700 V/600 V. A short-circuit fault in a semiconductor is tested and the results confirm the effectiveness of the proposed approach.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.