Abstract
A simple metallurgical process for fabricating vertical oxide nano-rod array structures with internal oxidation of alloys is described. Oxidation at high-temperatures and under low oxygen partial pressures can develop internally rod-like oxide precipitates in some dilute alloys such as Ni(Al) solid solutions. The vertical oxide nano-rod arrays can be developed on the metal substrates or components by removing the metallic matrix of the internal oxidation zone. Al2O3 or NiAl2O4 spinel nano-rod arrays were prepared by using M(Al) solid solutions. Pack cementation process to develop Ni(Al) solid solution zone on a metal surface was used for the fabrication of vertical nano-rod arrays on Ni substrates with desired shape. Near-net shape Ni substrates with vertical oxide nano-rod array structures on their surfaces can be prepared by using pack cementation and internal oxidation. Fabrication of vertical nano-rod arrays with Co(Al) and Fe(Al) solid solutions were also described briefly.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.