A dynamic reconfiguration model and method for load balancing in the snow-shaped distribution network

Abstract

The snow-shaped distribution network (SDN) is a cable distribution network composed of eight (or six) 10 kV feeders from four (or three) substations in a regular connection. Compared with the traditional 10 kV distribution network, SDN can support a wide range of load transfer among six or eight feeders. Aiming at the problem of load spatial-temporal unbalanced condition caused by the integration of distributed generators (DGs) and different load types in different feeders, this paper proposes a dynamic reconfiguration strategy for load balancing in SDN considering DGs and energy storage system (ESS). Firstly, the basic structure of SDN is analyzed and the power flow model for its dynamic reconfiguration is developed. Secondly, the dynamic reconfiguration optimization model for load balancing in SDN considering DGs and ESS is proposed to utilize the load transfer capability to mitigate the load unbalanced condition and reduce active power loss. Thirdly, the original non-convex model is converted into a mixed-integer second-order cone programming (MISOCP) model by applying the second-order cone relaxation and the big-M method, which is solved by CPLEX solver. Finally, the effectiveness of the proposed model and method are verified by an actual case in Tianjin and IEEE 33-node system. The analysis results show that the proposed method can significantly alleviate the load unbalanced spatial-temporal distribution and improve the economic efficiency by regulating the operation of SDN including ESS optimization and dynamic reconfiguration.