Abstract
In this work, filter paper was proven to be suitable as the substrate for the preparation of dynamic mechanical analysis (DMA) testing specimens to predict the curing behavior of phenol-formaldehyde (PF) resin adhesives for its stability during the curing temperature span. With this method, the curing behavior of PF resin was monitored by DMA in tensile-torsion mode. With the strain curves, the onset of curing temperature of PF resin could be determined clearly. The curing degree of PF resin could be calculated by the integral area in strain curves. The method to combine storage modulus (G′), tan δ, and strain curves together could explain the curing behavior of PF resin more comprehensively than the commonly used method using only G′ and tan δ curves. The DMA test results of PF resin with different viscosity and with accelerator implied the reliability of this novelty method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
