Abstract
Anomalous moisture transport in cement-based materials is often reported in the literature, but the conventional single-porosity moisture transport models generally fail to provide accurate simulation results. Previous studies suggested that the anomalous moisture transport could be caused by different moisture transport velocity in large and small pores. Based on this concept, the present study proposes a continuous dual-permeability model for cement-based material. The proposed model includes the transport contribution of both liquid water and water vapor, which are governed by liquid advection and vapor diffusion, respectively. We explicitly consider that moisture transport in the large pore region is faster than the small pore region. The volumetric fraction of each region is determined when fitting the measured sorption isotherms by using a bimodal equation. The validation with experimental data shows that the dual-permeability model can well simulate both the “normal” and the anomalous moisture transport. The applicability of the proposed model implies that the “dual-porosity property” could be one of reasons that cause anomalous moisture transport in cementitious materials. In addition, results show that vapor diffusion can be neglected for moisture transport in both porosities at high relative humidity (RH), while at low RH, vapor diffusion must be considered.
Highlights
The moisture state in cement-based materials is related to their durability (Baroghel-Bouny et al 2017)
While considering the concept of two-porosity still presents a simplification of the complex pore network, we find that this approach can significantly improve the prediction of moisture transport in cement pastes, in particular for the case so-called anomalous moisture transport
Conventional approaches to model transport processes through the pore system are based on the single-porosity concept and fail to accurately describe experimental results of anomalous moisture transport
Summary
The moisture state in cement-based materials is related to their durability (Baroghel-Bouny et al 2017). Carbon dioxide (CO2) can rapidly diffuse into the pores that are not filled with liquid water. These processes are able to cause corrosion of the reinforced steel (rebar) and deterioration of concrete structures (Angst 2018). Appropriate moisture transport models are essential for the predication of structures durability. A moisture transport model based on the Darcy’s or Fick’s law is used to predict the moisture state in cement-based materials (e.g., Bazant and Najjar 1972; Coussy 1995; Mainguy et al 2001). Concerning anomalous moisture transport reported in the literature (e.g., Wadsö 1992; Hall et al 1995; Taylor et al 1999; Saeidpour and Wadsö 2015a), the conventional models fail to predict the mass change of a specimen
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
