A Dual-Tone Multifrequency Receiver Using Synchronous Additions and Subtractions

Abstract

This paper describes a new detection algorithm for a dualtone multifrequency (DTMF) signal. The new algorithm basically uses only additions and subtractions but no multiplications. A signaling tone can be detected by sampling an input signal at four times each frequency involved in a signaling tone and accumulating these sampled values synchronously by additions and subtractions. This algorithm is referred to as the synchronous additions and subtractions (SAS) method. Many conventional methods have used various types of filters to detect signaling tones. In the SAS method in which the design of filters is unnecessary, only the generation of sampling pulses is required, and main operations are additions and subtractions. These features are useful to implement flexible receivers and various types of receivers. The simplicity of the SAS method is demonstrated by the implementation of a DTMF receiver using a conventional 8-bit microcomputer without any special hardware. The minimum signal-to-noise ratio is 5.7 dB when the receiver operates for the signaling tones to be accepted. Four easily measurable parameters are used to distinguish signaling tones from noise inputs. Only two false detections occurred for severe noise inputs of thirty hours.