Abstract

This paper describes the implementation of an antenna-in-package (AiP) with a dual polarization function, supporting a three-dimensional (3D) beamforming operation. In order to implement 3D beamforming, a Yagi-type end-fire antenna supporting each of the x and y directions and a patch-type broadsided antenna supporting the z-direction were implemented. The broadside antennas have dual polarization functions so that they can be received in any direction. Each antenna was implemented in four array structures to support beamforming operations. The broadside antenna was designed in a 2 × 2 array structure, with a patch-type antenna and two linear dual polarization functions. The single antenna operated with a gain of 6 dBi, an E-plane beam width of ±45 degrees, and an H-plane beam width of ±50 degrees and had an antenna gain of 9~11 dBi as well as a vertical/horizontal forming operation with a radiation angle of ±22 degrees The end-fire antenna unit was designed in a 1 × 4 array structure with a Yagi-type antenna. The single antenna had a gain of 4 dBi, with an antenna gain of 8 dBi in the array structure, and it was improved to 11 dBi by adding a parasitic array director. The final end-fire antenna unit had a radiation angle of ±11 degrees and a beamforming coverage of ±45 degrees The vertical and horizontal design results were secured for reception in any direction, and all the array antennas had a return loss of 10 dB or less in the entire frequency band, from 57 to 66 GHz.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call