A dual adaptive fault-tolerant control for a quadrotor helicopter against actuator faults and model uncertainties without overestimation

Abstract

This paper presents a dual adaptive fault-tolerant control strategy for a quadrotor helicopter based on adaptive sliding mode control and adaptive boundary layer. Within the proposed adaptive control strategy, both model uncertainties and actuator faults can be compensated without the knowledge of the uncertainty bounds and fault information. By virtue of the proposed adaptive control scheme, the minimum discontinuous control gain is adopted, which significantly reduces the control chattering effect. As compared to the existing adaptive sliding mode control schemes in the literature, larger actuator faults can be tolerated by employing the proposed control scheme while suppressing control chattering. Moreover, boundary layer is used to smoothen control discontinuity and further eliminate control chattering. Nevertheless, the choice of boundary layer thickness is a trade-off between system stability and tracking accuracy. By explicitly considering this fact, an adaptive boundary layer is developed and synthesized with the proposed adaptive control framework to ensure stability and tracking accuracy of the considered system. When the control parameter tends to be overestimated, the thickness of boundary layer can be appropriately adjusted to avoid control parameter overestimation. Simulation and experimental tests of a quadrotor helicopter are both conducted to validate the effectiveness of the proposed control scheme. Its advantages are demonstrated in comparison with a conventional adaptive sliding mode control scheme.