Abstract
A model for finely layered visco-elastic rock proposed by us in previous papers is revisited and generalized to include couple stresses. We begin with an outline of the governing equations for the standard continuum case and apply a computational simulation scheme suitable for problems involving very large deformations. We then consider buckling instabilities in a finite, rectangular domain. Embedded within this domain, parallel to the longer dimension we consider a stiff, layered beam under compression. We analyse folding up to 40% shortening. The standard continuum solution becomes unstable for extreme values of the shear/normal viscosity ratio. The instability is a consequence of the neglect of the bending stiffness/viscosity in the standard continuum model. We suggest considering these effects within the framework of a couple stress theory. Couple stress theories involve second order spatial derivatives of the velocities/displacements in the virtual work principle. To avoid C 1 continuity in the finite element formulation we introduce the spin of the cross sections of the individual layers as an independent variable and enforce equality to the spin of the unit normal vector to the layers (––the director of the layer system––) by means of a penalty method. We illustrate the convergence of the penalty method by means of numerical solutions of simple shears of an infinite layer for increasing values of the penalty parameter. For the shear problem we present solutions assuming that the internal layering is oriented orthogonal to the surfaces of the shear layer initially. For high values of the ratio of the normal––to the shear viscosity the deformation concentrates in thin bands around to the layer surfaces. The effect of couple stresses on the evolution of folds in layered structures is also investigated.
Highlights
It has long been recognized that most sedimentary rocks were originally deposited in sequences of soft horizontal layers at the bottom of shallow seas and hardened over time, resulting in a characteristically layered structure
The influence of the bending stiffness of the individual layers is considered within the framework of a couple stress theory
The combination of the basic model with a large deformation, PIC finite element method allows the simulation of a diverse range of crustal deformation problems
Summary
It has long been recognized that most sedimentary rocks were originally deposited in sequences of soft horizontal layers at the bottom of shallow seas and hardened over time, resulting in a characteristically layered structure. The formulation intended for materials with fine internal layering, which can be described by a single director orientation This constitutive model is designed for geological deformation problems involving very large deformations. We explore scenarios from global to internal buckling in non-linear finite element studies These show that buckling can be induced at much lower viscosity contrasts between the matrix and the embedded beam or plate than would be the case for isotropic materials. We illustrate the couple stress model by means of numerical and an analytical solution (the latter is derived in the Appendix D) of simple, finite shear of an infinite layer and revisit the folding problem in the light of the couple stress theory
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.