A direct mixed-body boundary element method for packed silencers.

Abstract

Bulk-reacting sound absorbing materials are often used in packed silencers to reduce broadband noise. A bulk-reacting material is characterized by a complex mean density and a complex speed of sound. These two material properties can be measured by the two-cavity method or calculated by empirical formulas. Modeling the entire silencer domain with a bulk-reacting lining will involve two different acoustic media, air and the bulk-reacting material. Traditionally, the interior silencer domain is divided into different zones and a multi-domain boundary element method (BEM) may be applied to solve the problem. However, defining different zones and matching the elements along each interface is tedious, especially when the zones are intricately connected. In this paper, a direct mixed-body boundary element method is used to model a packed silencer without subdividing it into different zones. This is achieved by summing up all the integral equations in different zones and then adding the hypersingular integral equations at interfaces. Several test cases, including a packed expansion chamber with and without an absorbing center bullet, and a parallel baffle silencer, are studied. Numerical results for the prediction of transmission loss (TL) are compared to experimental data.