Abstract
A passive direct ethylene glycol fuel cell stack is developed and tested, in which each single cell consists of an alkaline Pd-based anode, an acid Au-based cathode, and a cation exchange membrane. Experimentally, at the optimal reactant-feeding concentrations of 5.0 M EG and 9.0 M KOH as anolyte and 4.0 M H2O2 and 1.0 M H2SO4 as catholyte, this passive stack yields an open-circuit voltage of 3.0 V, a maximum current of 860 mA, and a peak power of 1178 mW at room temperature, which exhibits a two-time higher peak power density (24.5 mW cm−2) than a passive stack using the same type of fuel but the air as oxidant (12 mW cm−2). The impressive improvement can be ascribed to the faster hydrogen peroxide reduction reaction due to its two-electron transfer process rather than a four-electron process. In addition, the effects of feeding concentrations of reactants in both anolyte and catholyte on the stack performance are studied. Finally, the present passive stack is applied to power an electric fan for around 3 h under the mimetic underwater circumstance, demonstrating that this passive stack is a promising power source for airtight situations, such as underwater and outer space.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.