Abstract
We report experimental results on a highly efficient Q-switched a-cut Tm:YAP laser working at 1.99 µm. A fiber-coupled laser diode (LD) working at 795 nm was used to pump a Tm:YAP (diameter 5 mm × 9 mm) crystal with 3% Tm3+ doping. Under the input pump power of 44.5 W, it delivered a polarized pulsed laser output with a repetition rate of 10 kHz at 1.99 µm. The maximum output power was 13.29 W, corresponding to a slope efficiency of 36.5% and optical-to-optical conversion efficiency of 29.9%. The influences of curvature and transmittance of the output mirror on the laser output are analyzed and validated by experiments, and the results are of benefit for optimization of the laser cavity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.