A device for dynamic testing of the refractory ceramic resistance to biomass ash

Abstract

The corrosive effects of biomass ash on refractory materials in combustion chambers pose challenges. Development of new castable refractory materials which are more resistant to corrosion requires tests that accurately reflect the conditions occurring in real devices. This article describes the Computational Fluid Dynamics (CFD) design and construction of a device for evaluating the corrosion of refractory materials in dynamic regime. The device allows to simulate combustion chamber conditions accurately, to regulate an injection of corrosive medium on the tested material surface under the specified conditions (temperature, time, and flow). In the present investigation the conventional refractory material was exposed to attack of biomass ash at the temperature of 1300 °C for 3 h to test the functionality of the device. A burner with technology oxygen–enriched combustion was used to heat the device. The corrosion tests were conducted in accordance with the standard P CEN/TS 15,418 and the standard STN EN ISO 21404. The operational state required for corrosion tests at 1300 °C was achieved within 1.12 h. The extent of refractory material degradation in the dynamic corrosion regime was evaluated using electron microscopy-energy dispersive spectroscopy (EM-EDS) and compared with the results of a static crucible test (3 h at 1300 °C). The dynamic test provided sufficient information on the interactions of corrosion medium with the refractories. Its main advantages are the maintenance of non-equilibrium conditions by controlled deposition of the corrosion medium in quantity from 1 to −100 g/h, fast heating rate to operating temperature (20 °C/min), and the possibility of conditions variability during tests (temperature, ox-red. atmosphere, fuel gas flow etc.).