A Detection Method for Induction Motor Bar Fault Using Sidelobes Leakage Phenomenon of the Sliding Discrete Fourier Transform

Abstract

The Fourier transform is widely used to diagnose induction motor faults through the monitoring of fault signatures from measured signals such as stator currents. For a good frequency resolution, Fourier transform needs a long signal acquisition time that increases the probability of speed fluctuations which, leads to fault signatures variations. In addition, limited acquisition time and acquired points generate unwanted sidelobes leakage phenomenon, caused by step frequency resolution. In signal processing, the use of window functions allows the avoidance of this phenomenon with the cost of losing a part of signal information. In this paper, the authors propose a new method for the diagnosis of induction motor broken bar fault based on sliding window discrete Fourier transform and the effect of sidelobes of sideband frequencies on the fundamental component amplitude of stator current. The main advantage of the proposed method is that one can detect the amplitude of the fault indicator frequency in vicinity of the fundamental one in shorter time and with good precision even if the motor turns at no-load when compared to used methods, as fast Fourier transform, zoom fast Fourier transform, multiple signal classification, and zoom multiple signal classification. The simulation and experimental results validate the effectiveness of the proposed method.