Abstract
Vegetation barriers are an important environmental characteristic of spent fuel road transportation accidents. Spent fuel vessels may be affected by force majeure factors during transportation, which leads to damage to spent fuel assemblies and containers and can cause radionuclides to gradually release from assemblies to vessels to the external environment. In this work, considering the growth periods of coniferous vegetation barriers and vessel type, a radionuclide dispersion model based on computational fluid dynamics (CFD) was established by adding a decay term and a pressure loss term. The simulations showed that, first, compared to the small (Type-II) vessel, the effects of fluid flow around the large vessel (Type-I) have a more significant impact on radionuclide dispersion. The backflow around the Type-I vessel causes leaked radionuclides to disperse towards the vessel, and the larger the vessel is, the more significant the rise of the leaked radionuclide plume tail will be due to the increased negative pressure gradient area. Moreover, the area contaminated exceeding the maximum allowable concentration by radioactivity for the Type-I vessel is reduced gradually with the growth of coniferous vegetation barriers due to the weakening of the backflow effect by growing vegetation. Second, compared to vegetation barriers of 15 years and 23 years, the horizontal distance exceeding the maximum allowable concentration of the leaked 131I dispersion from Type II vessels near vegetation barriers for 12 years is the longest. The older the vegetation barrier is, the shorter the horizontal dispersion range, and the shape of radionuclide dispersion gradually transforms from flat to semicircular with vegetation barrier growth, but this could cause a greater radioactive accumulation effect near the leakage point, and the maximum concentration of leaked 131I reached 0.54 kBq·m−3 for leaked radionuclides from the Type II vessel under vegetation barriers of 23 years. In addition, improvement suggestions based on the proposed method are presented, which will enable the Standards Institutes to apply the research methodologies described herein across various scenarios. Environmental ImplicationCompared to nonradioative pollutants, radioactive pollutants are intercepted by vegetation barriers and then migrate to the soil through leaves, stems, and roots, which can contaminate the surrounding environment. Considering the effects of vessel type and coniferous vegetation growth, a radionuclide dispersion model based on CFD was established. Suggestions for decontaminating radioactive pollution areas have been proposed based on the simulation results of hypothetical scenarios. The scenario applicability improvements based on the proposed model could assist relevant Standards Institutes to making improving measures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.