Abstract
The magnesium-gadolinium (Mg–Gd) system provides an ideal model alloy for precipitation hardening. Evolution of precipitates in a Mg–16.2Gd–0.4Zr (wt.%) alloy during isothermal ageing from 150 °C to 300 °C was systemically studied using high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). The widely accepted four-stage precipitation sequence of the Mg–Gd(–Zr) alloy system has been accordingly updated to: super-saturated solid solution (S.S.S.S.) → ordered solute clusters → GP zones → β′ → βF' + tail-like hybrid structures → β1 → β. In addition to carefully revealing an updated precipitation sequence, new insights into the relationships amongst different precipitate phases were obtained and rationalised. (1) Solute clusters and GP zones form during the early stages of ageing and share the same structural unit; (2) Formation of β′ phase is accomplished via ordered stacking of zigzag GP zones along 101¯0α; (3) Coarsening of β′ phase promotes the formation of βF' phase and tail-like hybrid structures; (4) βF' phase facilitates the nucleation of β1 phase; and (5) β1 and β phases maintain a low-energy Σ9 interface and β1 phase finally transforms to equilibrium β phase in situ. The precipitate evolution at the grain boundaries during ageing were also investigated and grain boundary precipitate free zones were observed in Mg–16.2Gd–0.4Zr alloy aged at 250 °C or above.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
