Abstract
Safety issues have always been of great concern to the metro construction industry. Numerous studies have shown that safety issues are closely related to the design phase. Many safety problems can be solved or improved by developing the design. This study proposes a structured identification method for safety risks based on the metro design specifications, journal literature, and expert experience. A safety knowledge base (KB) for the design was established to realize safety knowledge sharing and reusing. The KB has been developed into Building Information Modeling (BIM) software as an inspection plug-in to achieve automated analysis and retrieval of safety risks. The designers are provided with a visualization of risk components to locate and improve the pre-control measures of the design. Subsequently, the process of design for safety (DFS) database creation was demonstrated with a metro station project, and the feasibility of applying the KB to safety checking in BIM was verified. In response to the inspection results, safety risks in the construction phases can be eliminated or avoided by standardizing and improving the design.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Environmental Research and Public Health
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.