Abstract
A wide-input-range (5–115 V) current-accuracy-enhanced dc–dc LED driver is presented in this paper. A feedforward synchronous current control (FSCC) scheme is developed to improve the LED current accuracy over wide ranges of input and output voltages. In the FSCC, a reconfigurable valley current sensor is proposed to provide accurate positive and negative valley inductor current information for the controller corresponding to hard- and soft-switching modes, respectively. A dynamic peak reference generator is developed to automatically adjust the peak current reference value dependent on input and output voltages for reducing the deviations of the average LED current under different input voltages and numbers of output LED, thereby improving the current accuracy. Implemented in a 0.5- $\mu \text{m}$ 120-V CMOS process, the experimental results show that the proposed LED driver IC achieves a current accuracy within ±6.0% of the average LED current of 350 mA over an input voltage range from 5 to 115 V and numbers of series-connected LEDs from 1 to 25 by using only a small inductor of 10 $\mu \text{H}$ . Compared with the state-of-the-art synchronous current control scheme, the variations of the LED current can be reduced by 2.3 and 4.2 times in the hard- and soft-switching modes, respectively, with the proposed LED driver using the FSCC.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Circuits and Systems I: Regular Papers
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
