Abstract
A wrist-worn dual-band smartwatch antenna with polarization diversity is proposed for smartwatches. The antenna has a cylindrical structure with a diameter of 33.6 mm and a height of 6.8 mm. The radiated structure is inspired by composite right/left handed-transmission lines (CRLH-TLs) to realize a dual-band operation (2.4 GHz and 5.8 GHz WLAN band). The unit cell of the CRLH-TL is analyzed, and its equivalent circuit model and the dispersion curves are studied for mode analyzation. The +1 and -1 modes of CRLH TL are employed for dual-band operating, and two orthogonal-polarized modes are excited with different types of feeding structure to realize the polarization diversity with low coupling and low envelope correlation coefficients (ECC). The wrist model is built in both simulation and experiment to evaluate the performance of the antenna, which shows a good radiation and diversity performances. The measured degree of freedom (DoF) is 1.92 and the capacity is 17.39 bit/s/Hz with 30 dB SNR. The results of specific absorption rate (SAR) are also studied and they are pretty low. These characteristics of the proposed antenna make it a competitive candidate for wrist-worn wireless body area network devices.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.