A courtly brocade belt belonging to Qajar period (1789–1925), Iran

Abstract

This paper identifies the materials used to make a brocade belt belonging to the Qajar courtiers in Iran. This belt consists of two fabric types: red support and golden brocade. Accordingly, this paper examined the skin and tannin type, fiber types, dyeing agents, mordant, and metal wrapping of brocade yarns and metal buckle. Technical imaging, ESI–MS, FORS, FTIR and SEM–EDS were used to identify the materials. Multi-band imaging methods included Vis, UVL, IRR, and UVR, in which UVFC and IRFC images were obtained after processing. The results showed that cotton yarn was used in both fabrics. The red fabric yarns were dyed using cochineal and alum mordant. Also, the yellow brocade yarns were dyed using catechins-rich plants, and in this dyeing process, polyphenols and alum have been as mordant. Madder-dyed yarns are also found in parts of the belt. Examination of the metal wrapping of brocade yarns suggests using strips of copper-nickel alloy with a thin layer of gold-silver alloy. This secondary coating protects the copper-nickel strips and increases their golden luster. The leather analysis of the leather parts also indicated the using cattle/calfskin tanned with gallotannins. Belt buckle analysis also shows the use of brass alloy with a high percentage of zinc, leading to a golden sheen and the buckle desired strength. The results show the use of low-cost materials in the manufacture of clothing for the lower levels of the Qajar court.