Abstract
One attractive concept for future commercial reactors is one of low cost with minimum advanced technology. Cost-minimized reactors with different operating modes are compared to reveal the most cost-minimized reactor with impact of deign parameters on the cost of electricity (COE). Three kinds of operating modes are considered; i.e. first stability region (FS), second stability region (SS) and reversed shear (RS). Deuterium–tritium fueled, 1000 MW(e) reactors with conventional aspect ratio are assumed. Several criteria for the parameter survey are used; for example, (1) thermal-to-electricity conversion efficiency is assumed to be 34.5% with water as a coolant, (2) average neutron wall load must not exceed 5 MW m −2 with a plasma major radius >5 m, (3) 2 MeV neutral beam injector is applied. It is concluded that the RS operating mode is the most cost-minimized. The results indicated that attaining high β N (the Troyon beta coefficient), low q 95 (safety-factor on the 95% flux surface), and high f bs (fraction of bootstrap current) is the best way to obtain a cost-minimized reactor. This cost-minimized RS reactor is advantageous because it can be designed without using advanced coil technology nor an advanced cooling system.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.