A cost evaluation method for dynamic line balancing

Abstract

AbstractA procedure is presented for calculating stochastic costs, which include operator (labor) and inventory costs, associated with dynamic line balancing. Dynamic line balancing, unlike the traditional methods of assembly and production line balancing, assigns operators to one or more operations, where each operation has a predetermined processing time and is defined as a group of identical parallel stations. Operator costs and inventory costs are stochastic because they are functions of the assignment process employed in balancing the line, which may vary throughout the balancing period, and the required flow rate. Earlier studies focused on the calculation of the required number of stations and demonstrated why the initial and final inventories at the different operations are balanced.The cost minimization method developed in the article can be used to evaluate and compare the assignment of operators to stations for various assignment heuristics. Operator costs and inventory costs are the components of the cost function. The operator costs are based on the operations to which operators are assigned and are calculated for the entire work week regardless of whether an operator is given only a partial assignment which results in idle time. It is assumed that there is no variation in station speeds, no learning curve effect for operators' performance times, and no limit on the number of operators available for assignment. The costs associated with work‐in‐process inventories are computed on a “value added” basis. There is no charge for finished goods inventory after the last operation or raw material before the first operation.The conditions which must be examined before using the cost evaluation method are yield, input requirements, operator requirements, scheduling requirements and output requirements. Yield reflects the output of good units at any operation. The input requirement accounts for units discarded or in need of reworking. The operator requirements define the calculation of operator‐hours per hour, set the minimum number of operators at an operation, and require that the work is completed. The scheduling requirements ensure that operators are either working or idle at all times, and that no operator is assigned to more than one operation at any time. The calculation of the output reflects the yield, station speed, and work assignments at the last operation on the line.An application of the cost evaluation method is discussed in the final section of the article. Using a simple heuristic to assign operators, the conditions for yield, inputs, operators, scheduling, and output are satisfied. The costs are then calculated for operators and inventories.In conclusion, the cost evaluation method for dynamic balancing enables a manager to compare the costs of assigning operators to work stations. Using this method to calculate the operator and inventory costs, a number of different heuristics for assigning operators in dynamic balancing can be evaluated and compared for various configurations of the production line. The least cost solution procedure then can be applied to a real manufacturing situation with similar characteristics.