Abstract
193nm immersion and Hyper NA lithography are used at 45nm and beyond. The next generation of lithography will use a new technology such as Double Pattering, EUV or EB. Double patterning is one of the currently acceptable technologies. Three common double pattern techniques are Litho-Etch-Litho-Etch (LELE), freezing, and sidewall (spacer) process. From a technical standpoint LELE is a very promising process, except for the second litho alignment. However, the cost of ownership will be very high because LELE will cost about twice as much as the current single litho patterning process. In order to build up a suitable double patterning technique, many device makers are developing unique processes. Two of these processes are freezing and sidewall. Flash memory makers are diligently investigating the sidewall process by CVD. This is because of the lack of a second litho alignment step, even with its high cost. The high cost of the CVD process can be reduced if a spin on material is used. One of the goals of this paper is to reduce the cost of ownership by using spin on coatings for the sidewall process. Currently we are investigating this approach to control the sidewall width, profile and other properties.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.