Abstract
Abstract The enormous industrial usage of nickel during its manufacture and recycling has led to widespread environmental pollution. This study was designed to examine the ability of Gelidium amansii biomass to biosorb Ni2+ ions from an aqueous solution. Six independent variables, including contact time (1.0 and 3.0 h), pH (4 and 7), Ni2+ concentration (25 and 200 mg·L−1), temperature (25°C and 50°C), G. amansii biomass (1.0 and 4.0 g·L−1), and agitation mode (agitation or static), were investigated to detect the significance of each factor using a Plackett–Burman design. The analysis of variance for the Ni2+ biosorption percentage indicated that three independent variables (contact time, temperature, and agitation–static mode) exhibited a high level of significance in the Ni2+ biosorption process. Twenty experiments were conducted containing six axial, eight factorial, and six replicates points at center points. The resulting face-centered central composite design analysis data for the biosorption of Ni2+ exhibited a very large variation in the removal percentage of Ni2+, which ranged from 29.73 to 100.00%. The maximum Ni2+ biosorption percentage was achieved in the 16th run with an experimental percentage quantified as 100.00% under the experimental conditions of 3 h of incubation time and 45°C with 100 rpm for agitation speed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
