A corotational procedure that handles large rotations of spatial beam structures

Abstract

A practical motion process of the three dimensional beam element is presented to remove the restriction of small rotations between two successive increments for large displacement and large rotation analysis of space frames using incremental-iterative methods. In order to improve convergence properties of the equilibrium iteration, an n- cycle iteration scheme is introduced. The nonlinear formulation is based on the corotational formulation. The transformation of the element coordinate system is assumed to be accomplished by a translation and two successive rigid body rotations: a transverse rotation followed by an axial rotation. The element formulation is derived based on the small deflection beam theory with the inclusion of the effect of axial force in the element coordinate system. The membrane strain along the deformed beam axis obtained from the elongation of the arc length of the beam element is assumed to be constant. The element internal nodal forces are calculated using the total deformational nodal rotations. Two methods, referred to as direct method and incremental method, are proposed in this paper to calculate the total deformational rotations. An incremental-iterative method based on the Newton-Raphson method combined with arc length control is adopted. Numerical studies are presented to demonstrate the accuracy and efficiency of the present method.