Abstract
Purpose – The purpose of this paper is to present a three-dimensional finite volume-based analysis on the effects of propeller blades on fountain flow in a wave soldering process and performs an experimental validation. Design/methodology/approach – Solder pot models with various numbers of propeller blades were developed and meshed by using hybrid elements and simulated by using the FLUENT fluid flow solver. The characteristics of the fountain, such as flow profile, velocity vector, filling time, and fountain advancement, were investigated. Molten solder (Sn63Pb37) material, a temperature of 250°C, and a propeller speed of 830 rpm were applied in the simulation. The predicted results were validated by the experimental fountain profile. Findings – The use of a six-blade propeller in a solder pot increased the fountain thickness profile and reduced the filling time. Moreover, a six-blade propeller design resulted in a stable fountain profile and was considered the best choice for current wave soldering processes. Practical implications – This study provides a better understanding of the effects of propeller blades on the fountain flow in the wave soldering process. Originality/value – The study explores the fountain flow behavior and provides a reference to the engineers and designers in order to improve the fountain flow of the wave soldering.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Numerical Methods for Heat & Fluid Flow
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.