A Comprehensive Study on the Effect of Regular and Staggered Openings on the Seismic Performance of Shear Walls

Abstract

Shear walls have high strength and stiffness, which could be used at the same time to resist large horizontal loads and weight loads, making them pretty beneficial in several structural engineering applications. The shear walls could be included with openings, such as doors and windows, for relevant functional requirements. In the current study, a building of G + 13 stories with RC shear walls with and without openings has been investigated using ETABS Software. The seismic analysis is carried out for the determination of parameters like shear forces, drift, base shear, and story displacement for numerous models. The regular and staggered openings of the shear wall have been considered variables in the models. The dynamic analysis is carried out with the help of ETABS software. It has been observed that shear walls without openings models perform better than other models, and this is in agreement with the previous studies published in this area. This investigation also shows that the seismic behaviour of the shear wall with regular openings provides a close result to the shear wall with staggered openings. At the roof, the displacement of the model with regular openings was 38.99 mm and approximately 39.163 mm for the model with staggered openings. However, the model without a shear wall experienced a displacement of about 56 mm at the roof. Generally, it can be concluded that the openings have a substantial effect on the seismic behaviour of the shear wall, and that should be taken into consideration during the construction design. However, the type of opening (regular or staggered) has a slight effect on the behaviour of shear walls.