Abstract
The gallium-nitride (GaN) high electron-mobility transistor (HEMT) technology has emerged as an attractive candidate for high-frequency, high-power, and high-temperature applications due to the unique physical characteristics of the GaN material. Over the years, much effort has been spent on measurement-based modeling since accurate models are essential for allowing the use of this advanced transistor technology at its best. The present analysis is focused on the modeling of the scattering (S-) parameter measurements for a 0.25 μm GaN HEMT on silicon carbide (SiC) substrate at extreme operating conditions: a large gate width (i.e., the transistor is based on an interdigitated layout consisting of ten fingers, each with a length of 150 μm, resulting in a total gate periphery of 1.5 mm), a high ambient temperature (i.e., from 35 °C up to 200 °C with a step of 55 °C), a high dissipated power (i.e., 5.1 W at 35 °C), and a high frequency in the millimeter-wave range (i.e., from 200 MHz up to 65 GHz with a step of 200 MHz). Three different modeling approaches are investigated: the equivalent-circuit model, artificial neural networks (ANNs), and gated recurrent units (GRUs). As is shown, each modeling approach has its pros and cons that need to be considered, depending on the target performance and their specifications. This implies that an appropriate selection of the transistor modeling approach should be based on discerning and prioritizing the key features that are indeed the most important for a given application.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have