Abstract
The EU's industrial sector discards about 18.9% of its energy as waste heat, much of which has the potential for recovery. This study addresses the challenge by focusing on the advancement of latent heat thermal energy storage (LHTES) using phase change materials (PCMs) encapsulated within industrial waste foundry sand (WFS). WFS, a problematic by-product, is repurposed as a supportive matrix for NaNO3 and solar salt PCMs, tailored for effective integration into high-temperature industrial processes. The paper provides a thorough mechanical and thermal examination of the WFS-salt PCMs, highlighting their improved thermal stability, performance, and compatibility with direct thermal energy systems. The composite PCMs demonstrated melting points well-suited for industrial waste heat applications and achieved an energy density of 542.0 ± 8.3 kJ/kg for NaNO3 and 516.0 ± 4.5 kJ/kg for solar salt, An experimental cascade PBLHS, based on these CPCMs, with a capacity of 262 MJ, designed to mimic an industrial heat source at 450 °C, was systematically tested to assess its energy density and efficiency over repeated charging/discharging and free cooling cycles. Its overall system efficiency is found to be 68.5%. These findings position WFS-salt PCMs as a promising and environmentally beneficial approach to enhance industrial energy efficiency and utilisation.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
