Abstract
This study compared membrane fouling in a sponge-submerged membrane bioreactor (SSMBR) and a conventional membrane bioreactor (CMBR) based on sludge properties when treating synthetic domestic wastewater. In the CMBR, soluble microbial products (SMP) in activated sludge were a major contributor for initial membrane fouling and presented higher concentration in membrane cake layer. Afterwards, membrane fouling was mainly governed by bound extracellular polymeric substances (EPS) in activated sludge, containing lower proteins but significantly higher polysaccharides. Sponge addition could prevent cake formation on membrane surface and pore blocking inside membrane, thereby alleviating membrane fouling. The SSMBR exhibited not only less growth of the biomass and filamentous bacteria, but also lower cake layer and pore blocking resistance due to lower bound EPS concentrations in activated sludge. Less membrane fouling in SSMBR were also attributed to larger particle size, higher zeta potential and relative hydrophobicity of sludge flocs.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
