A comparison of static and rotordynamic characteristics for two types of liquid annular seals with and without helical grooved stator

Abstract

Less leakage is a benefit of parallel grooved liquid seals (labyrinth seals). But researches show that the liquid seal with parallel grooves on the rotor harms the rotor stability. The seal with helical grooves on stator performs well in terms of rotordynamics, and its leakage is sensitive to the rotating speed. To make use of the advantages of both seals and improve seal stability, based on the Smooth-stator/Parallel Grooved-rotor (SPG) liquid seal, a Helical Grooved-stator/Parallel Grooved-rotor (HGPG) liquid seal is designed. To evaluate two liquid seals’ leakage, rotordynamic characteristics and drag power loss, a transient computational fluid dynamics-based method is employed. This method is based on the multi-frequency elliptical-orbit rotor whirling model and the mesh deformation technique. The published experimental data of the leakage and rotordynamic force coefficients for an SPG liquid seal are used to validate the accuracy and dependability of the current method. Seal leakage and force coefficients are presented and compared for the SPG liquid seal and the HGPG liquid seal at various pressure drops. The influences of parallel groove depth on the leakage and rotordynamic properties for the HGPG liquid seals at two rotational speeds (2000, 6000 r/min) are analyzed. The numerical findings demonstrate that the novel HGPG liquid seal has a lower leakage flow rate (by ∼22.3%) than the traditional SPG liquid seal. There is an optimal parallel groove depth that minimizes leakage. The presented novel HGPG liquid seal significantly improves rotordynamic stability, due to the similar effective stiffness and the obviously larger positive effective damping. Reducing parallel groove depth can increase the positive effective damping. In terms of leakage and rotordynamic characteristics, the novel HGPG liquid seal is a better seal design for liquid turbomachinery.