Abstract
The deposition of spray applied through hydraulic flat fan pressure nozzles mounted on an Oxford precision sprayer and spinning disc Micromax atomisers were compared in wheat crops at a range of growth stages. The Micromax rotary atomisers when operating at a disc speed of 5000 r.p.m. (drop size VMD 80–90 μm) were found to be the most efficient at all the growth stages examined. The Micromax atomisers operating at 3500 r.p.m. disc speed (drop size VMD 130–140 μm) produced a similar spray deposition pattern to the flat fan nozzle although crop and ground deposits were lower up to GS59 with the Micromax atomisers. The pest control efficacy of the two nozzle types was evaluated in three aphicide trials on wheat crops. In the first two trials deltamethrin at one twentieth of the recommended dosage rate (6.25 g a.i. l −1) provided a similar degree of cereal aphid control to the applications at half the recommended dosage rate using both types of nozzle. In the third trial similar levels of aphid control were achieved using deltamethrin at one quarter of the recommended dosage rate applied using the rotary atomisers compared with one half of the recommended dosage rate using the flat fan nozzle. The impact of the deposition patterns on beneficial insects is discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.