Abstract
AbstractThe cold stage specimen surface in our Balzer's 300 Freeze‐etch instrument, averages 29–43°C warmer than the reading on the GA‐1 stage temperature control unit. By introduction of Indium foil seals above and below the stainless steel plug in the stage tower, the specimen cold stage surface temperatures were still 9–10°C warmer than the GA‐1 reading. After replacing the stainless steel plug with a copper plug and using Indium seals, the cold stage specimen surface was brought within 2.6°C of the GA‐1 temperature reading. In addition, the copper plug, Indium seal modified stage cools about two times faster in going from –100°C to –150°C than the normal stainless steel stage modified with Indium seals.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
