A Comparison of Overhead Irrigation Scheduling and Switch Tensiometers

Abstract

Proper irrigation management is essential for producing quality container-grown woody ornamentals and reducing off-site runoff. Research has shown that tensiometers can be used as an effective tool to schedule irrigation for woody ornamentals. The objective of this experiment was to compare the effect of cyclic and tensiometric irrigation methods on growth of lantana. Lantana camara `New Gold' liners were established in a 3 pine bark: 1 peat:1 mason sand (by volume) medium. Low-tension switch tensiometers were compared to scheduled overhead [one time a day (1×) at 0600 and cyclic irrigation three times a day (3×) at 0600, 1200, and 1800] for the production of 1-gallon lantana plants. Three low-tension tensiometers (1/block) were set at 7 cb and allowed to irrigate over a 12-hour period. Three separate planting dates occurred and then terminated after ≈7 weeks. Tensiometric irrigation increased root and shoot growth compared to scheduled irrigation for the 24 May 1999 harvest date. Cyclic irrigation produced plants with shoot and total root weights >1× and tensiometer treatments for the September harvest date. Tensiometers sharply reduced irrigation requirements compared to scheduled irrigation volume by at least 50% of the 1× and 3× treatments weekly. Analysis of nutrients in leachate for June indicated increased B and Fe concentrations in the 3× irrigation treatment. Lower concentrations of Ca, Mg, and Na were measured in August. Lantana growth was acceptable for all irrigation treatments and harvest dates.