A Comparison of Experimental and Computation Results of Finding Effective Characteristics of Elastic Properties of Polymer Layered Composites from Carbon and Glass Fabrics

Abstract

Anisotropy of mechanical properties of the entire material and each of its layers is characteristic for polymer layered composite materials, as well as the fact that production processes of the composite material and parts from it are often combined in time. In this case, the elastic properties and strength of the material will be different not only in the thickness of the part, but also at each point. All this leads to a complication of the design process, which is due to the need to determine the elastic properties and strength of the polymer layered composite materials, taking into account the structure of the entire material and each of its layers. This work aims at evaluating the existing computational methods of finding effective characteristics of elastic properties by comparing computation results obtained by various methods with each other, as well as with the experimental results related to elastic properties of polymer layered composite materials from carbon and glass fabrics. We estimated the computational methods of finding effective characteristics of the elastic properties of composites based on the experimental results of finding the characteristics of the elastic properties of polymer layered composite materials made of carbon and glass fabrics, differing in density and type of weaving. The experimental values of the effective characteristics of elastic properties were determined as a result of standard tensile tests of laboratory specimens. As a result of the study, it was found that all the considered models and methods give consistent results when calculating the longitudinal modulus of elasticity E 11, the results of calculating shear modulus E 33 and shear moduli G 12 and G 23 are less consistent for all the considered materials. The comparison of the results of the experimental studies and computations showed that the Chamis model and the bridge model are better than other models to predict the values of the longitudinal elastic modulus.