Abstract
As a means of meeting ever increasing emissions and fuel economy demands car manufacturers are using aggressive engine downsizing. To maintain the power output of the engine turbocharging is typically used. Due to the miss-match of the mass flow characteristics of the engine to the turbocharger, at low engine mass flow rates, the turbocharger can suffer from slow response known as “Turbolag”. Mono-scroll turbines are capable of providing good performance at high mass flow rates and in conjunction with low inertia mixed flow turbines can offer some benefits for transient engine response. With a multi-entry system the individual volute sizing can be matched to the single mass flow pulse from the engine cylinders. The exhaust pulse energy can be better utilised by the turbocharger turbine improving turbocharger response, while the interaction of the engine exhaust pulses can be better avoided, improving the scavenging of the engine. The behaviour of a mono-scroll turbocharger with the engine using engine simulation tools has been well established. What requires further investigation is the comparison with multi-entry turbines. CFD (Computational Fluid Dynamics) has been used to examine the single admission behaviour of a twin and double scroll turbine. Turbocharger gas stand maps of the multi-entry turbines have been measured at full and single admission. This data has been used in a 0D engine model. In addition, the turbine stage has been tested on the engine and a validation of the engine model against the engine test data is presented. Using the validated engine model a comparison has been made to understand the differences in the sizing requirements of the turbine and the interaction of the mono-scroll and multi-entry turbines with the engine. The impact of the different efficiency and mass flow rate trends of the mono and multi-entry turbochargers are discussed and the trade-offs between the design configurations regarding on engine behaviour are investigated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have