Abstract

A comparative study on the thermal and catalytic degradation of polybutylene terephthalate (PBT) at atmospheric pressure was conducted. The weight loss of PBT under thermal degradation was significantly influenced by the temperature between 360 °C and 380 °C, but little affected by the PBT particle size. Four groups of catalysts include metal chloride, metal oxide, metal acetate, and metal copper powder were used to test PBT degradation activity. Copper (II) chloride is the most active one for increasing the percentage PBT weight loss more than 100% in comparison with the result of thermal degradation at a temperature of 360 °C for 30 min. PBT and catalyst mixtures can be prepared by impregnation and physical method, the former resulted in a better PBT degradation. The percentage PBT weight loss in the presence of CuCl 2 increased steadily between 320 °C and 380 °C which was different from the results of thermal degradation. The time for obtaining a same percentage PBT weight loss reduced effectively when compared to the catalytic to thermal degradation. The weight ratio of CuCl 2/PBT was tested between 0 and 0.2 and the optimal ratio was 0.1. The gaseous product distribution analyzed by GC/MS for PBT thermal and catalytic degradation revealed almost the same and the major products were ethane, carbon monoxide, carbon dioxide, 1-butene, 2-butene, 1,3-butadiene, and butadiene dimmer. But the relative abundance of major products was changed, especially for 1,3-butadiene increased dramatically, and a new chlorocompound was produced in catalytic degradation. In condensed liquid product, both the number and the molar mass of components were more and greater than that of in gaseous product and 4-heptylacetophenone was the most abundance product. In PBT catalytic degradation, 4-heptylacetophenone and some products were decreased and some even disappeared completely while the abundance of benzoic acid increased and three new products were generated.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.