Abstract
The paper assesses and compares the friction and wear behavior of SAE-AISI 1055 steel and brass (CuZn39Pb2) under dry sliding condition. The tribological behavior was investigated and compared by conducting two different experiments, the first experiment conducted on a CSM tribometer, and the second experiment was carried out on a test bench in horizontal lathe machine where device holder pin is fabricated and mounted on a test bench and a rotating disc, varying the normal load exert on the disc by the pin and the rotation speed of the disc. These tests consisted of measuring friction coefficient and wear loss of samples. Experiments are carried out in normal load 5-10 N, sliding speed 0.24-0.35 and 0.48 m/s. Variations of coefficient of friction during sliding at different initial surface roughness, normal load and sliding speed are investigated. Results show that the two alloys had different friction and wear behavior, for steel friction coefficient increase slowly with the increase of normal load and sliding speed. For brass friction coefficient decreases with the increase of normal load and sliding speed. On the other hand, it is also found that wear loss increase with sliding distance. Microscopic of worn surfaces for each alloy were carried out and compared.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
