A comparative study on enhanced arsenic(V) and arsenic(III) removal by iron oxide and manganese oxide pillared clays from ground water

Abstract

Stable iron and manganese oxide pillared clays were synthesized with high surface area and studied as adsorbents for the first time towards As(III) and As(V) so as to understand the role of both oxide pillars for both As(III) and As(V) adsorption. Both the pillared clay materials showed high surface area (>260m2/g) and thermal stability (up to 500°C). Equilibrium studies were carried out at different concentration using three different materials at pH of 6at 28°C. For both As(III) and As(V) adsorption the uptake capacity of pillared materials is found to be many fold in comparison to the starting clay. Manganese oxide pillared material shows better affinity towards As(III) due to in situ oxidation to As(V). Synergistic effect of high surface area and presence of active manganese oxide pillars helps in enhanced uptake of total arsenic including substantial amount of As(III). Studies on mixed arsenic solution with mixed adsorbent proved to be much better than the individual adsorbent particularly for the contaminated water with substantial amount of As(III). Arsenic uptake in presence of Fe(III) and Cl− shows negligible decrease in the efficiency. Both the pillared material performed much better when subjected to actual contaminated water continuously for ten times. No leaching of arsenic was observed which confirms the possibility of using these materials in actual field trial for enhanced arsenic removal for contaminated water.