Abstract
The purpose of this study is to estimate and compare suction stress between sand and silt sampled from the coast of Korea. The water content and matric suction of sand (Joomunjin) and silt (Saemangeum) were first examined using an automated soil–water characteristic curve (SWCC) apparatus based on the axis translation technique. SWCCs were then estimated from the test results using the van Genuchten (1980) model. At equal matric suction, the corresponding water content of silt was higher than that of sand. Moreover, the saturated water content and air-entry value (AEV) of silt were larger than those of sand. Using the fitting SWCC parameters, suction stress characteristic curves (SSCCs) were estimated according to the method proposed by Lu and Likos (2006). The SSCC behavior for sand and silt was different and significantly depended on the material properties, particularly pore size and pore size distribution. For sand, the suction stress exhibited rapid variation with changes in matric suction, but for silt, the suction stress approached a constant value as the matric suction increased. In addition, when the matric suction was smaller than the AEV of soil, the suction stress was equal to the magnitude of the matric suction. In contrast, when the matric suction exceeded the AEV of soil, suction stress had a nonlinear shape with respect to the matric suction.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.