Abstract
A novel PM arc guideway motor (PMAGM) is developed due to the drawback of the conventional motor reciprocating within certain angle. The PMAGM can directly drive load to make reciprocating motion within a limited angle with advantages of simplification, reliability, high efficiency, etc.. Aiming at the permanent magnet (PM) magnetization and solenoid coil electrifying modes, the PM deflection angle is parameterized and the influence on electromagnetic force has been analyzed between different magnetization and electrifying modes. Results show that electromagnetic force in Y direction magnetized along the external field force lines at proposal 1 is 51.23% higher than that of vertical magnetization, and the electromagnetic resultant force increases by 45.91%. As the angle of the PM deflection within 3o, the electromagnetic force in X direction points to the right, which is not good for PM slidable assembly swing. Based on comprehensive analysis of the advantages and disadvantages of several electrifying modes, the electricity combination under full swing angle is optimized.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
