Abstract
The effects of HBr/Ar and HBr/Cl2 mixing ratios in the ranges of 0–100% Ar or Cl2 on plasma parameters, densities of active species influencing the dry etch mechanisms were analyzed at fixed total gas flow rate of 40 sccm, total gas pressure of 6 mTorr, input power of 700 W and bias power of 300 W. The investigation combined plasma diagnostics by Langmuir probes and the 0-dimensional plasma modeling. It was found that the dilution of HBr by Ar results in maximum effect on the ion energy flux with expected impact on the etch rate in the ion-flux-limited etch regime, while the addition of Cl2 influences mainly the relative fluxes of Br and Cl atoms on the etched surface with expected impact on the etch rate in the reaction-rate-limited etch regime.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
