Abstract
Recent advances in developing hydrocarbon‐based proton‐exchange membrane fuel cells have focused on optimizing materials. Voltage recovery (VR) has shown notable improvements for perfluorosulfonic acid‐based fuel cells. This study is the first to present a VR protocol designed specifically for hydrocarbon‐based fuel cells. The proposed protocol involves 100 voltage steps at 0.08 and 0.12 V, lasting 20 s each, at 80 °C, under backpressure and oversaturated conditions. The effectiveness of the protocol is compared to other protocols, including one proposed by the US Department of Energy (DOE) and another VR from the literature. The VR protocol results in a 100% increase in the mass activity of the fully hydrocarbon‐based fuel cells after only 1 h, while the DOE protocol leads to no improvement, and another established protocol requires 3 h to show a 70% increase. The proposed protocol is also effective for Nafion catalyst layers. The H2/air performance at 0.7 V of the fully hydrocarbon‐based fuel cells increases by 21%, resulting in a current density of 0.9 A cm−2, similar to the Nafion reference. This suggests that the proposed protocol is highly effective and significantly reduces the conditioning time, which can be a significant cost factor.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
