Abstract
To improve the accuracy of color reproduction for camouflage printing, a new color matching method, named monitor-paper-fabric, was proposed by importing color management into textiles, which matched the printing pastes according to the color of the paper card printed by the ink-jet printer after color management. Not like the traditional color matching method, it matched the printing pastes according to the color from computer monitor after color correction. Two color matching methods were analyzed by comparing the color difference. It was found that the “monitor-paper-fabric” color matching method could be considered as a convenient and feasible color matching method. Most color differences between the monitor and the fabric in the camouflage pattern were reduced to lower than 4, except for color blocks 5 and 6. In addition, the color differences of six color blocks between the paper and the fabric were all less than 3.5, and were lower than those between the monitor and the fabric. The color consistency between the paper and the fabric was better than that between the monitor and the fabric.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
