Abstract
A compact single-feed circularly polarized microstrip antenna is proposed to achieve symmetric radiation pattern over a wide range of observation angles. In order to reduce the radiation aperture and consequently broaden the circular polarization (CP) and the half power beamwidth (HPBW) of the antenna, a partially etched superstrate and a conducting cavity are employed in the design. Further, reasonable axial ratio (AR) and impedance bandwidths are realized within the compact structure by using a simple series crossed-slot aperture coupled feeding. As a consequence, the overall dimension of the fabricated prototype is 0.32λ0× 0.32λ0× 0.12λ0at the center operating frequency of 1.56 GHz, and a 3.0% overlapped bandwidth of 10 dB return loss (RL) and 3 dB AR is obtained. Within the bandwidth, symmetric CP radiation pattern over almost the entire upper hemisphere is observed and the HPBW is also increased from 60° to 106°.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
