Abstract

AbstractThis article presents a novel, compact, single feed circularly polarized (CP) microstrip antenna. Proposed design involve an inverted Y‐shaped radiating patch fed by an L‐shaped microstrip line feed and a rectangular open‐loop placed near its right corner. A semi‐rectangular ground plane is used on the opposite side of the substrate. Coupling between the rectangular open‐loop and the inverted Y‐shaped patch plays a vital role in attaining wideband CP, while the semi‐rectangular ground plane is crucial for enhancing impedance bandwidth (IBW). The optimized design achieved measured wide IBW of 5.164 GHz (65.53%, spanning over 5.297‐10.461 GHz) having its center frequency (frc) at 7.878 GHz. The corresponding measured axial ratio bandwidth (ARBW) obtained inside the measured IBW curve is 2.25 GHz (having its center CP resonating frequency fcp 7.52 GHz, spanning over 6.40‐8.65 GHz, 29.92%). Measurement results are validated in both Ansys Electronics Desktop 2020 R1 and CST Microwave Studio 2018. Proposed antenna is fabricated on FR‐4 epoxy substrate of 1.6 mm thickness and exhibits a very small footprint of just 400 mm2 (20 × 20 mm2) (size 0.58λmgL × 0.58λmgL × 0.046λmgL, where λmgL is the measured guided wavelength at lower resonating frequency fmrL = 5.297 GHz) with 51.31% reduction in size. Measured maximum peak gain for the impedance band is 2.04 dBi at 8.8 GHz and 1.96 dBi at fcp 7.52 GHz. The structure of the proposed antenna is extremely simple, quite small in size and its CP bands can be suitable for some C‐band and ITU (International Telecommunication Union)—8 GHz application.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.