Abstract
This communication presents the design of a compact loop antenna with independent frequency tuning. The proposed antenna consists of a feed line fed by a $50~\Omega $ coaxial probe and four resonating arms on the adjacent sides of the feed line. The two outer resonating arms are directly coupled to the feed line and the other two inner resonating arms are coupled to the outer arms. The proposed antenna has a footprint of 25 mm $\times 10$ mm $\times0.2$ mm. The designed antenna operates at 0.9, 2.4, 3.5, and 5.5 GHz. Each of these bands is individually tuned using varactor diodes. Thus, the aggregation of these tunable bands provides wide bandwidth. The impedance bandwidth and percentage bandwidth of the antenna are 270/1000/400/700 MHz and 33%/47.6%/11%/12.7%, respectively. Furthermore, the gain and efficiency of the antenna are 1.7/1.3/2.1/2 dBi and 60%/63%/65%/69%, respectively. The prototype antenna is fabricated and tested. The measured impedance and radiation characteristics of the antenna are in good correlation with the simulation results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.