Abstract
A compact (50 × 50 × 4 mm3) dual-band radio frequency identification (RFID) tag antenna mountable on metallic objects is proposed for the ultra-high frequency (UHF) band (917∼923.5 MHz) and the microwave (MW) band (2.4∼2.45 GHz). With the proximity-coupled feed loop, the proposed antenna consists of two symmetric planar inverted-F antenna (PIFA) elements for the UHF band passive tag and a meander microstrip patch antenna for the MW band active tag. The performance of the proposed antenna is verified by mounting it on the different sizes of the metallic object. Furthermore, the passive tag antenna in the UHF band furthermore may be used for energy harvesting techniques to improve the lifetime of the active tag in the MW band. The measured maximum read range is 5.50 m in the UHF band and 14.15 m in the MW band when the proposed tag antenna is mounted on the metallic objects. The total efficiency for all operating frequency bands is higher than 50%. High isolation (>12 dB) between tag antennas in the UHF band and the MW band is achieved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
